Yaesu Ft 7 B. Yaesu FT7 Specifications Specifically, the 5.5 - 5.0 Mhz VFO signal is premixed (subtracted from) the heterodyne oscillator crystal frequency (except on 80 meters where no heterodyne oscillator is used) 80, 40, 20, 15 and 10-meter transceiver for fixed and mobile CW/SSB (50 Watts) and AM (12 Watts) operations
Yaesu FT7 японский КВ трансивер 70х годов для работы из полей from www.youtube.com
The Yaesu FT-7 amateur transceiver covers 80 to 10 meters in CW, LSB and USB modes GENERAL: Type: Amateur HF transceiver: Frequency range: 10-80 m in eight bands 3.5-4.0 MHz (80 m) 7.0-7.5 MHz (40 m) 14.0-14.5 MHz (20 m) 21.0-21.5 MHz (15 m) 28.0-28.5 MHz (10 m A), optional 28.5-29.0 MHz (10 m B), standard 29.0-29.5 MHz (10 m C), optional 29.5-29.9 MHz (10 m D), optional
Yaesu FT7 японский КВ трансивер 70х годов для работы из полей
Good sensitivity and selectivity, CW audio filter, the VFO frequency is 5-5.5 MHz so that the receiver covers the 80-meter band directly 80, 40, 20, 15 and 10-meter transceiver for fixed and mobile CW/SSB (50 Watts) and AM (12 Watts) operations The Yaesu FT-7 amateur transceiver covers 80 to 10 meters in CW, LSB and USB modes
Yaesu FT 7 B recepção HD YouTube. Covers the HAM bands 80 to 10 m in AM, SSB and CW; P out: 50 W (AM 25 W) It was exactly as the seller described and after a good cleaning, it is a very attractive radio
Yaesu FT7 2014. This transceiver was very small for its time; by current modern standards however it is a large mobile set. The mixer stage then subtracts the carrier oscillator frequency (either 8998.5 khz or 9001.5.